ABSTRACT Gut microbiota plays an important role in animal health, production and diseases. Little is known about whether heat stress alters the composition of quail gut microbiota; therefore, we studied the effects of heat stress on growth performance, antioxidant functions, heat shock proteins and caecal microbiota. Two groups of 40 (20-day-old) quails were set up, including a control reared at 24 ± 2°C and a heat stress group subjected to heat stress at 36 ± 2°C for 4 h per day for 7 consecutive days. We found that heat stress significantly elevated the relative expression levels of HSP70 and HSP90 mRNA in the thymus, bursa and spleen by real-time fluorescence quantitative PCR assay, indicating successful establishment of the experimental model. Heat stress was found to have an effect on gut microbiota composition. At the genus level, Alistipes were significantly increased in the heat stress group. PICRUSt2 function prediction revealed that most of the KEGG pathways with high temperature-induced abundance differences are metabolism-related. These data indicated that heat stress reduced the production performance of quails by affecting antioxidant functions, as well as the composition and structure of the intestinal microbiota. The results of this study provide technical information for conducting research on heat stress prevention and control techniques in quails.

ABSTRACT This study investigated the effect of resveratrol on the immune and inflammatory responses and the mRNA levels of splenic toll-like receptor (TLR)-4 signaling pathway-related genes of broilers under heat stress (HS). One hundred and sixty-two birds were allocated to three groups, each with 6 replicates, for 21 continuous days. The three treatments were as follows: the control group (22 ± 1 °C), the HS (33 ± 1 °C for 10 h d-1 and 22 ± 1 °C for the remaining time) group and the HS + resveratrol (400 mg kg-1) group. At the end of the trial, one bird per replicate close to the average body weight (BW) was selected, exsanguinated, and slaughtered. Compared with the control group, the HS treatment decreased (p<0.05) final BW, average daily gain (ADG), average daily feed intake (ADFI), relative weight of bursa of Fabricius and spleen, serum immunoglobulin (Ig) Y, IgA and interleukin (IL)-10 contents, and splenic IL-10 mRNA level, while it increased (p<0.05) feed/gain, mRNA levels of splenic tumor necrosis factor-α (TNF-α), TLR-4, nuclear factor-kappa-B (NF-κB), IL-1β, and IL-6. Compared to the HS group, the HS+resveratrol group exhibited increased (p<0.05) final BW, ADG, relative weight of bursa of Fabricius and spleen, serum IgY, IgA and IL-10 contents, and splenic IL-10 mRNA level, while it exhibited lower (p<0.05) TNF-α, IL-1β and IL-6 contents in serum, and splenic TLR4, TNF-α, IL-1β, and NF-κB mRNA levels. In conclusion, resveratrol prevented a HS-impairment of the immune function of broilers by blocking the abnormal activation of the TLR4 signaling pathway.

Petri nets are robust mathematical tools for the modelling, handling, and control of deadlock problems in automated manufacturing systems (AMSs). Several methods have been proposed to prevent deadlocks in AMSs. However, it is important to convert the controlled system represented by Petri nets into the program of a programmable logic controller (PLC) for the implementation of automation tasks. This study proposes a methodology based on Petri nets for deadlock prevention, and generates PLC codes for an AMS. In the suggested methodology, a Petri net model of an uncontrolled system is built, and the controlled Petri net model is developed using a deadlock-prevention method. The controlled Petri net model is then transformed into an automation-controlled Petri net model, which is further converted into a controlled token-passing logic model. The controlled token-passing logic model is utilised to generate the ladder diagrams for the AMS under consideration. The proposed methodology was tested using a real-world AMS at King Saud University labs. It provides an effective method for PLC implementation from a controlled system model represented by Petri nets.

Petri-nette is robuuste wiskundige instrumente wat gebruik word om dooiepunt probleme in geoutomatiseerde vervaardigingstelsels (AMSe) te modelleer, hanteer en te beheer. Verskeie metodes is al voorgestel om dooiepunte in AMSe te verhoed, maar dit is belangrik om die beheerde stelsel deur die Petri-nette voorgestel om te skakel na die rekenaarkode van 'n programmeerbare logiese beheerder (PLC) sodat dit geïmplementeer kan word. 'n Metodologie gegrond op Petri-nette vir dooiepunt voorkoming word voorgehou en genereer PLC rekenaarkode vir AMSe. In die voorgestelde metodologie word n Petri-netmodel van n onbeheerde stelsel geskep en die beheerde Petri-netmodel is dan ontwikkel met die dooiepuntvoorkomingsmetode. Die beheerde Petri-net model word dan getransformeer tot 'n outomasiebeheerde Petri-netmodel wat dan verder omskep word in n beheerde kenteken-aanstuur logiese model. Hierdie model word dan gebruik om leerdiagramme vir die AMS te genereer. Dié metodologie is getoets in 'n reële wêreld AMS by die King Saudi Universiteit se laboratoriums. Dit verskaf n effektiewe metode vir PLC implementering van n beheerde stelsel wat deur Petri-nette voorgestel word.

ABSTRACT Avian leukosis virus subgroup J (ALV-J), a member of the retroviridae family, can infect both broilers and layers and induce a spectrum of different neoplasms, resulting in serious economic losses in poultry production. Epigallocatechin-3-gallate (EGCG), the major constituent of green tea, has demonstrated remarkable anti-inflammatory and cancer chemopreventive effects in many animal tumor bioassays, cell culture systems and epidemiological studies. To assess the antiviral effects of EGCG on ALV-J-induced cell apoptosis in vitro, DF-1 cells were treated with different EGCG concentrations (0, 5, 10, 20 and 40 µg/mL), and their antiviral effects were examined at different time points (0, 24, 48, 72 and 96 h) using a variety of assays. EGCG alleviated the ALV-J-induced apoptosis in a dose-dependent manner. Because high concentrations (20 and 40 µg/mL) inhibited DF-1 cell growth, and low concentration (5 µg/mL) did not suppress the ALV-J virus, 10 µg/mL was the most appropriate concentration. After 96 h of incubation, 10 µg/mL EGCG improved the ALV-J-triggered suppression of the nuclear transcription factor system by enhancing cytoplasmic NF-κB p50/p65 expression and inhibiting nuclear NF-κB p50/p65 expression, resulting in decreased cell apoptosis. These results demonstrated that EGCG inhibited ALV-J-induced apoptosis in DF-1 cells in a dose-dependent manner via the NF-κB signaling pathway, and that 10 µg/mL EGCG is the optimal concentration, which may be useful for therapeutic drug design.

The stabilization of roadways in soft rock under high stress has always been a major concern for deep underground coal mines. This paper describes a case study focusing on the stability of a soft-rock roadway in Yuandian coal mine in Anhui Province, China. The Beiyi main return roadway in this mine was primarily supported by U-steel support; however, considerable deformation and severe failures occurred. Therefore, a new support design, the yielding bolt - grouting support design, was proposed based on the physical and mechanical parameters, in situ stress measurements, and the failure characteristics of the roadway. The mechanics of the yielding bolt - grouting support was analysed and compared to the normal bolt - grouting support. A field experiment was conducted in a 100 m long section of the roadway. The monitoring results showed that compared with the old support, the new support design reduced the deformations of roof, floor, and rib by 41.4%, 56.1%, and 64.7% respectively, and the maximum deformation rate decreased from 15.12 mm/d to 9.28 mm/d. This case study indicates that the yielding bolt - grouting support design is an effective method to support roadways in soft rock under high stress.

SUMMARY Ectopic mammary tissue develops due to the incomplete involution of the mammary crest, which is more frequently located in the axilla and more common in women. This tissue undergoes pathophysiological changes similar to those of the normal breast, among which malignancy is found. The primary carcinoma of this tissue is infrequent and its most common manifestation is the palpable mass. As in the normal breast, the most frequent histology of ectopic breast cancer is the Infiltrating Ductal Carcinoma and, because of its atypical location, it is usually diagnosed late and it would have a more aggressive course and a worse prognosis, due to the greater proximity to lymph nodes, skin and chest wall. Because of the few published data, the diagnosis and treatment are not well established, but the available schemes are similar to those used in normal breast cancer. We present the case of a 41yearsold female patient with a diagnosis of ectopic breast cancer in the right axillary region, without distant invasion, treated with surgery, chemotherapy and radiotherapy, whoevolves favorably, without metastasis or relapses during follow-up.

RESUMEN El tejido mamario ectópico se desarrolla debido a la involución incompleta de la cresta mamaria, de localización más frecuente en la axila y más común en mujeres. Este tejido sufre cambios fisiopatológicos similares a los de la mama normal, entre los cuales se encuentra la malignización. El carcinoma primario de este tejido es infrecuente, y su manifestación más común es la masa palpable. Al igual que en la mama normal, la histología más frecuente del cáncer de mama ectópica es el Carcinoma Ductal Infiltrante y, por su localización atípica, suele diagnosticarse tardíamente, y tendría un curso más agresivo y de peor pronóstico, dado por la mayor cercanía a ganglios, piel y pared torácica. Debido a los pocos datos publicados, el diagnóstico y tratamiento no están bien establecidos, pero los esquemas disponibles son similares a los utilizados en el cáncer de mama normal. Se presenta el caso de una paciente de 41 años, con diagnóstico de cáncer de mama ectópica en la región axilar derecha, sin invasión a distancia, tratada con cirugía, quimioterapia y radioterapia, que evoluciona favorablemente, sin metástasis ni recidivas durante seguimiento.

Rock in engineering and geological environments is usually in complex stress states. Based on many experimental results for rock under different loading conditions, and combined with failure modes found in previous studies, stress triaxiality is introduced to describe different stress states, and the relationship between failure modes and stress triaxiality is analysed in detail. For a given kind of rock, with decreasing stress triaxiality the failure mechanism changes from tension fracture to local shear failure and general shear failure. Two demarcation points of stress triaxiality exist: between tension fracture and local shear failure, and between local shear failure and general shear failure. The controlling parameters that dominate tension fracture, local shear failure, and general shear failure are different. Using a reasonable assumption based on the experimental results, a failure criterion corresponding to three distinct failure modes is presented. This failure criterion is defined by seven material parameters. The accuracy and applicability of the proposed failure criterion are examined using experimental data derived for sandstone in this study and published experimental data for rock salt and marble under conventional triaxial compression tests. The data used covers a wide range of stress triaxiality and various failure mechanisms. The predictions from the proposed failure criterion agree well with the experimental data.

Coal seam gas problems can adversely affect the safety and productivity of underground coal mines, leading to fatalities and financial losses. Conventional gas management technologies using ventilation and gas drainage are unable to deal with the high and irregular gas emissions associated with high-production longwall mining. New technologies need to be developed to supplement the traditional gas management techniques to minimize the hazard of coal seam gas. Thin spray-on liners (TSLs) have gained some success for rock surface support since their introduction to the mining industry. Due to their relatively low permeability and appropriate mechanical properties, TSLs also show potential to be used as a gas management tool in underground coal mines. In this paper we review the current gas management challenges and discuss the potential use of TSLs as a gas management tool in underground coal mines. This may involve reducing gas migration into the excavations/roadways, enhancing in-seam gas drainage, and preventing spontaneous combustion. Some potential areas for future research work are identified.

A number of conventional and advanced analytical techniques (proximate and ultimate analysis, low-temperature oxygen-plasma ashing, X-ray diffraction, X-ray fluorescence spectrometry, coal petrography, and light-element electron microprobe analysis) have been integrated and crosschecked to provide detailed characterization of coals from the Highveld coalfield in South Africa, as a basis for better understanding of the mineralogical and chemical properties of the individual coal sources that are blended as feedstocks for combustion and carbon conversion processes. The techniques included methods to quantify the abundance and composition of the mineral matter (minerals and non-mineral inorganic elements), and also the abundance and chemical composition of the individual macerals in the individual coals concerned. Kaolinite is the most abundant of the minerals in the coals studied, with lesser but still significant proportions of quartz, mica and/or illite, dolomite, calcite, and pyrite. Small but variable proportions of anatase, goyazite, and siderite are present in some coal samples. Electron microprobe analysis, based on a special configuration for light-element study, shows that the vitrinite contains less carbon and more oxygen, and has significantly higher concentrations of nitrogen and organic sulphur, than the inertinite macerals in the same samples. Minor proportions of organically-associated inorganic elements, including titanium, were also identified in some of the maceral components. A comprehensive knowledge of the minerals and non-mineral inorganic elements in the coals used for feedstock preparation, obtained by integration of data from these advanced analytical techniques with more conventional analyses, may be of benefit in understanding the processes that take place during coal utilization, and also in avoiding or ameliorating some of the operational and environmental problems that may occur in different sectors of the coal utilization industry.

Microwave sulphating roasting was applied to zinc oxide fume from a fuming furnace for the removal of F and Cl. The effect of important parameters such as roasting temperature, holding time. and vapour flow were investigated and the process conditions were optimized using response surface methodology. The results showed that the effects of roasting temperature and holding time on the removal efficiency of F and Cl were most significant, and the effect of vapour flow is of much lower importance. The defluorination and dechlorination efficiency increased rapidly as the roasting temperature and holding time increased, while the vapour flow had little effect. The defluorination efficiency could reach 91.3% while the dechlorination efficiency could reach 89.5%, under the process conditions of roasting temperature 655°C, holding time 65.2 minutes, and vapour flow of 6.8 ml/min. The results showed that the removal of F and Cl from zinc oxide fume using a microwave direct roasting process is feasible and reliable.

Cytotoxic T lymphocyte-associated antigen-4 (CTLA-4) is a negative regulator of T cell activation, which competes with CD28 for B7.1/B7.2 binding, and which has a greater affinity. Fusion of specific antigens to extracellular domain of CTLA4 represents a promising approach to increase the immunogenicity of DNA vaccines. In this study, we evaluated this interesting approach for CTLA4 enhancement on prostate stem cell antigen (PSCA)-specific immune responses and its anti-tumor effects in a prostate cancer mouse model. Consequently, we constructed a DNA vaccine containing the PSCA and the CTLA-4 gene. Vaccination with the CTLA4-fused DNA not only induced a much higher level of anti-PSCA antibody, but also increased PSCA-specific T cell response in mice. To evaluate the anti-tumor efficacy of the plasmids, murine models with PSCA-expressing tumors were generated. After injection of the tumor-bearing mouse model, the plasmid carrying the CTLA4 and PSCA fusion gene showed stronger inhibition of tumor growth than the plasmid expressing PSCA alone. These observations emphasize the potential of the CTLA4-fused DNA vaccine, which could represent a promising approach for tumor immunotherapy.

Hormesis is an adaptive response to a variety of oxidative stresses that renders cells resistant to harmful doses of stressing agents. Caffeic acid (CaA) is an important antioxidant that has protective effects against DNA damage caused by reactive oxygen species (ROS). However, whether CaA-induced protection is a hormetic effect remains unknown, as is the molecular mechanism that is involved. We found that a low concentration (10 μM) of CaA increased human liver L-02 cell viability, attenuated hydrogen peroxide (H2O2)-mediated decreases in cell viability, and decreased the extent of H2O2-induced DNA double-strand breaks (DSBs). In L-02 cells exposed to H2O2, CaA treatment reduced ROS levels, which might have played a protective role. CaA also activated the extracellular signal-regulated kinase (ERK) signal pathway in a time-dependent manner. Inhibition of ERK by its inhibitor U0126 or by its specific small interfering RNA (siRNA) blocked the CaA-induced improvement in cell viability and the protective effects against H2O2-mediated DNA damage. This study adds to the understanding of the antioxidant effects of CaA by identifying a novel molecular mechanism of enhanced cell viability and protection against DNA damage.

Chlorine-containing minerals are commonly present in coal. Associated minerals such as pyrite can undergo exothermic reactions. Consequently, it is of great significance to study the effect of inorganic chloride on the spontaneous combustion of coal. In this study, the effects of five inorganic chlorides (sodium chloride, magnesium chloride, potassium chloride, calcium chloride, and zinc chloride) on the spontaneous oxidation of coal were investigated. Analysis of the gaseous products of coal oxidization at low temperatures (323K to 453K) showed that the presence of inorganic chlorine in coal markedly decreases O2 consumption and the generation of CO and CO2. Samples of raw coal and chlorine-loaded coal were oxidized for 36 hours under the same experimental conditions. Infrared diffuse reflectance spectroscopy results showed that inorganic chloride can inhibit the oxidative decomposition of some functional structure components (methyl, methylene, methine, and hydroxy) in the coal. The influence of inorganic chloride on the oxidation characteristics of the functional groups in coal during spontaneous combustion was investigated using benzyl alcohol and 1-phenyl propanol as model compounds, which were tested under the same experimental conditions as the coal samples. The oxygen consumption of model compounds with and without the addition of inorganic chloride further suggested that inorganic chloride may hinder the oxygenolysis of these structures during low-temperature oxidation. This phenomenon can be attributed to the radical reaction from the perspective of radical chemistry. It can therefore be concluded that inorganic chlorides play an inhibitory role in the spontaneous combustion of coal.

The phenolic compound profiles in the skins of white grapes, containing ten wine grape and six table grape cultivars grown in the National Grape Germplasm Resource Nursery at the Zhengzhou Fruit Research Institute of China, were investigated using ultra-high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS/MS). The objective of this study was to evaluate if phenolic compound profiles can be used as indictors to differentiate the quality of wine and table grape cultivars. Significant differences in phenolic compound profiles were observed among these grape cultivar skins. The highest content of total hydroxybenzoic acids, total hydroxycinnamic acids, total flavan-3-ols, total flavones and flavonols and total stilbenes was observed in the skin of the Canada Muscat, Rommel, Kadin parmac, Bacchus and Silvaner cultivars respectively. A great compositional difference was observed among these grape cultivars regarding the individual hydroxycinnamic acids and flavonols. Cluster analysis showed that three table grape cultivars, namely Canada Muscat, Rommel and Kadin parmac, possessed significantly different phenolic compound profiles compared to the other grape cultivars. These results suggested that phenolic compound patterns and contents played important roles in evaluating the quality of table and wine grapes and might provide useful information on grape breeding and winemaking in China.

ABSTRACT Objective: To investigate the clinical use of cone beam computed tomography in the diagnosis of patients with odontogenic jaw keratocyst and to guide computer-aided surgical treatment planning. Methods: Imaging, image processing, and visualization technologies were used to produce clear diagnosis, provide proper treatment, and formulate favourable prognosis. Cone beam computed tomography was used to collect medical information including site, extent, shape, and other characteristic features of a patient with large odontogenic jaw keratocyst. Results: The imaging technique produced excellent results in imaging, image processing and three-dimensional (3D) visualization. Conclusions: The 3D digital reconstruction model of the odontogenic jaw keratocyst was shown intuitively.

RESUMEN Objetivo: Investigar el uso clínico de tomografĩa computarizada de rayo cónico en el diagnóstico del queratoquiste maxilar, y guiar la planificación del tratamiento quirúrgico asistido por computadora. Métodos: La imaginología, el procesamiento de imágenes, y tecnologías de visualización, se utilizaron para producir diagnósticos claros, proporcionar tratamiento adecuado, y formular pronósticos favorables. La tomografía computarizada de rayo cónico fue utilizada para recoger información médica incluyendo lugar, extensión, forma y otras características de un paciente con un queratoquiste odontogénico maxilar de gran dimensión. Resultados: La técnica de imaginología produce excelentes resultados en imagen médica, procesamiento de imágenes y visualización tridimensional (3D). Conclusión: El modelo de reconstrucción digital 3D del queratoquiste odontogénico maxilar se mostró intuitivamente.